All LEDs are over
excessively
bright.
|
Not enough modules in each individual HCHP-36 Power Supply circuit. |
Check and make sure
the specifications are followed to connect the modules and Power Supply. No less than 10 (B, G, WW, W) or 15 (R, A) modules should be
connected in each individual HCHP-36 Power Supply circuit in series connection. |
All LEDs turn dim. |
Too many modules in each individual HCHP-36 Power Supply circuit. |
Check and make sure
the specifications are followed to connect the modules and Power Supply. No more than 30 (B, G, WW, W) or 45 (R, A) modules should be connected in each individual HCHP-36 Power Supply circuit in series connection.
|
Some of
the
LEDs are off. |
Some of
the connections between modules and power supply may not
have been connected properly.
|
Check and make sure to connect the output wire of the Power Supply to the input wire of modules according the same color of wire. |
