LED Power Supply Series

Item No.:

HCLMP-30, HCLMP-60, HCLMP-100, HCLMP-150, HCHP-36

Technical Data:

Operating Temperature:	-25ºC -60ºC
Storage Temperature:	-40ºC -80ºC
Operating Relative Humidity:	10%-90%(non-condensing)
StorageRelative Humidity:	5%-95%(including condensing)

Caution: Please strictly follow the below specifications to connect Modules in each individual power supply circuit.

Module	Power	Maximum Quantity(modules)
		HCLMP-30	HCLMP-60	HCLMP-100	HCLMP-150
		(30W)	(60)	(100W)	(150W)
HCLMP3024X	0.24W	120 pieces	240 pieces	400 pieces	600 pieces
HCLMP2024W	0.24W
HCLMP3036X	0.36W	80 pieces	160 pieces	260 pieces	400 pieces
HCLMP2036X	0.36W
MA363X	2.88W	10 strips	20 strips	30 strips	50 strips
MA3645X	4.32W	6 strips	12 strips	20 strips	30 strips
MA3072RGB	7.20W	4 strips	8 strips	12 strips	20 strips
ME6048X	4.80W/m	6 strips	12 strips	20 strips	30 strips
ME-W-6048X	4.80W/m
ME3072RGB	7.20W/m	4 strips	8 strips	12 strips	20 strips
ME-W-3072RGB	7.20W/m

HCLMP-30:6-1/8'' (156mm) × 1-5/8'' (40mm) × 1-1/8'' (30mm)

Item No.	Size	Input Voltage	Output Channels	Output Current	Output Power
C12-144	130×70×25mm	DC12-24V	3CH	4A/CH	144W-288W

Notes:

1.If no effect selected, then "OFF" all;	NON-WATERPROOF！
2.After each selection, should restart.

Effect Selection:

1 AUTO = FADE IN & OUT (1 round) - JUMP (2 rounds) - BUILD (1 round) - CHASE (1 round) - Green - Blue - Start over again.

2 FADE IN & OUT = to fade in & fade out one by one as: Red, Green, Blue, Purple, Yellow, Cyan, White.

3 JUMP = to jump one by one as: Red, Green, Blue, Purple, Yellow, Cyan, White.

4 BUILD = Red - Red (jump 3 times) - Green - Green (jump 3 times) -Blue -Blue (jump 3 times) - Start over again.

5 CHASE = JUMP (6 rounds) - Red - Reverse JUMP (2 rounds) - Start over again.

6 RED = Red

7 GREEN = Green

8 BLUE = Blue

Caution: Please strictly follow the below specifications to connect Modules in each individual power supply circuit.